- Package: Plastic bottle 25gr. ±5%.
- Type (visually): Pearls.
- Colour (visually): White.
- Purpose: for UV PCB developing
- Thinner: Water.
Instructions for use:
Pour the product in a non-metallic container then add 2.5L of water (product dilutes with water in proportion 1/100). Add 3-5 drops of Anti-foaming agent and slowly mix until the product completely dissolves. Immerse the scanned board in the solution. Recommended solution temperature 28-30°С. Place the board on the front side to you. A foil picture appears in a while when mixing energetically the solution. Once the PCB developing is completed wash it well with cool water. You can move on to PCB Etching.
- Storage requirements: maximum storage temperature to 30ºС. Keep in original, tightly closed packages, in dry indoor areas, away from direct sunlight.
- Expiration: 2 years after first opening.
- Warning of danger:
- R36 / 37 / 38 - Irritating to eyes, respiratory system and skin.
- S22 - 26 - Do not breathe dust; In case of contact with eyes or skin, rinse immediately with plenty of water.
- Safety measures:
- If inhaled: Fresh air.
- If in contact with skin: Wash the skin with plenty of water. Change the garment.
- If in contact with eyes: Wash intensively eyes with water. Seek medical advice from an Ophthalmologist.
- If swallowed: Provide the person who swallowed the product generous amount of water.
- Get medical advice/attention!
