AJAX message
Currency  
Home
Continue shoping
Powder for PCB Etching Iron Тrichloride 0.5L
Powder for PCB Etching Iron Тrichloride 0.5L
All pictures are for illustrative purpose only. Real product may differ from picture, but all parameters and quality are as described
Powder for PCB Etching Iron Тrichloride 0.5L
Product characteristics
Reference number 15020008
Weight 0.65 kg
Enquiry Share
quantity Item per one piece
1-4 0.00 лв.
5-14 0.00 лв.
15+ 0.00 лв.
The product is not available
The prices include VAT

-Package: Plastic tube 0.5L. ±5%.
-Type (visually): Liquid.
-Colour (visually): Red-brown. 
-Smell: Chlorine
-Solution: ready for use
Storage requirements: maximum storage temperature to 30 ° C. Keep in original, tightly closed packages, in dry indoor areas, away from direct sunlight.

 

Instructions for use:

  • Before we continue further, there are some things you must have in mind: 

– Work with chemical reagents requires the necessary attention! 
– Described process must be done outdoor and the necessary safety measures must be followed!
– Residual
product has harmful environmental impact and its direct wasting in the sewage system can lead to erosion of pipelines and emergencies, so it is necessary the instructions for safety use at the end of content to be followed. Do not take actions of the described if you are incapable of providing the environment safety use as well as the Water Supply and Sewage installations, please!


Pour the product in a plastic container (dish) with the necessary dimensions (do not use metallic container!) in a ventilated area.
Mix the solution with a plastic or wooden stick before its use.
Place the board you will etch.
The process can be accelerated by heating the solution (recommended temperature of the solution, 35-40°C) and the board shakes in the solution.
Duration of the etching process lasts between 20 and 40 minutes until complete elimination of unnecessary copper from the board (indicated time is approximately and depends on the intensity of the solution and on its temperature).
Once etching is finished, take the PCB out of the solution and wash it well with water.
Keep the prepared solution in its original package away from the reach of children and direct sunlight!


Safety use instruction

 

Н-warnings for danger:
Н318 – Causes serious eye damage.
Н315 – Causes skin irritation.
Н302 – Harmful if swallowed.
Р-
statements for safety use:
Р264 – Wash thoroughly after handling.
Р270 – Do not eat, drink or smoke when using this product.
Р280 – Wear protective gloves/protective clothing/eye protection/face protection.
Р305+Р351+Р338 –
IF IN CONTACT WITH EYES:

Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
Р332+Р313 – If skin irritation occurs: Get medical advice/attention.
Р301+Р312 – If swallowed:
Immediately call a POISON CENTER or a doctor if you feel unwell.

The prices include VAT
Warning
Cart
   
Product enquiry
Name*:
E-mail*:
Phone*:
Enquiry*: